Jeep RENEGADE 2017, Руководство пользователя

Страница: 81 / 332

— Hazard Warning Lights
The hazard warning indicators light up when
the vehicles Hazard Warning flasher switch
has been pushed.
— Park/Headlight ON Indicator Light
This indicator will illuminate when the park
lights or headlights are turned on.
— Turn Signal Warning Lights
The instrument cluster arrow will flash inde-
pendently for the left or right turn signal as
selected, as well as the exterior turn signal
lamp(s) (front and rear) as selected when the
multifunction lever is moved down (left) or up
(right).
• A continuous chime will sound if the ve-
hicle is driven more than 1 mile (1.6 km)
with either turn signal on.
• Check for an inoperative outside light bulb
if either indicator flashes at a rapid rate.
— Stop/Start Active Indicator Light —
If Equipped
This telltale will illuminate when the Stop/
Start function is in “Autostop” mode.
Blue Telltale Lights
— High Beam Indicator Light
This indicator shows that the high beam
headlights are on. Push the multifunction
control lever away from you to switch the
headlights to high beam. Pull the lever to-
ward you to switch the headlights back to low
beam. Pull the lever toward you for a tempo-
rary high beam on, "flash to pass" scenario.
White Telltale Lights
— Cruise Control ON Indicator
This light will turn on when the electronic
speed control is ON, but not set.
— Light Sensor Failure
This light illuminates when there is light
sensor failure. If this light illuminates, have
an authorized dealer inspect it.
— Set Speed Warning Light — If
Equipped
When Set Speed Warning is turned on, the
speed warning telltale will illuminate in the
instrument cluster with a number matching
the set speed. When the set speed is ex-
ceeded, a single chime will sound along with
pop up message of speed warning exceeded.
When the set speed is exceeded by 3 km/h or
more, the indication will light up yellow and
flash along with a continuous chime (up to
ten seconds or until the speed is no longer
exceeded). ”
The number “120” is only an example of a
speed that can be set.
Gray Telltale Lights
— Cruise Control Cancelled Light
This light will turn on when the cruise control
has been cancelled by the driver. Refer to
“Speed Control — If Equipped” in “Starting
and Operating” for further information.
ONBOARD DIAGNOSTIC
SYSTEM (OBD II)
Your vehicle is equipped with a sophisticated
onboard diagnostic system called OBD II.
This system monitors the performance of the
emissions, engine, and automatic transmis-
sion control systems. When these systems are
79