Jeep RENEGADE 2017, Руководство пользователя

Страница: 157 / 332

To Decrease Speed
When the Speed Control is set, you can de-
crease speed by pushing the SET
(-) button.
The driver’s preferred units can be selected
through the Uconnect system if equipped.
The speed increment shown is dependant on
the chosen speed unit of U.S. (mph) or Metric
(km/h):
U.S. Speed (mph)
• Pushing the SET (-) button once will result
in a 1 mph decrease in set speed. Each
subsequent tap of the button results in a
decrease of 1 mph.
• If the button is continually pushed, the set
speed will continue to decrease until the
button is released, then the new set speed
will be established.
Metric Speed (km/h)
• Pushing the SET (-) button once will result
in a 1 km/h decrease in set speed. Each
subsequent tap of the button results in a
decrease of 1 km/h.
• If the button is continually pushed, the set
speed will continue to decrease until the
button is released, then the new set speed
will be established.
Accelerating For Passing
Press the accelerator as you would normally.
When the pedal is released, the vehicle will
return to the set speed.
Resume Speed
To resume a previously set speed, push the
RES button and release. Resume can be used
at any speed above 20 mph (32 km/h).
Deactivation
A soft tap on the brake pedal, pushing the
CANC button, or normal brake pressure while
slowing the vehicle will deactivate the Speed
Control without erasing the set speed from
memory.
Pushing the on/off button or placing the igni-
tion to OFF erases the set speed from
memory.
REAR PARKSENSE
The Rear ParkSense system provides visual
and audible indications of the distance be-
tween the rear fascia and a detected obstacle
when backing up, e.g. during a parking ma-
neuver.
Rear ParkSense will retain the last system
state (enabled or disabled) from the last ig-
nition cycle when the ignition is changed to
the RUN position.
Rear ParkSense can be active only when the
gear selector is in REVERSE.
Rear ParkSense Sensors
The four Rear ParkSense sensors, located in
the rear fascia/bumper, monitor the area be-
hind the vehicle that is within the sensors’
field of view. The sensors can detect ob-
stacles
from approximately 12 inches
(30 cm) up to 59 inches (150 cm) from the
rear fascia/bumper in the horizontal direc-
tion, depending on the location, type and
orientation of the obstacle.
155