Jeep RENEGADE 2017, Руководство пользователя

Страница: 183 / 332

NOTE:
• Your vehicle may be equipped with a
compact spare tire or a limited — use
spare tire. Refer to “Tires — General
Information” in “Servicing And Mainte-
nance” in your Owner’s Manual at
www.jeep.com/en/owners/manuals/ for
further information.
• For vehicles so equipped, do not at-
tempt to install a center cap or wheel
cover on the compact spare.
8. Install the wheel bolts with the threaded
end of the wheel bolt toward the wheel.
Lightly tighten the wheel bolts.
WARNING!
To avoid the risk of forcing the vehicle off
the jack, do not fully tighten the wheel
bolts until the vehicle has been lowered.
Failure to follow this warning may result in
serious injury.
9. Lower the vehicle to the ground by turning
the jack handle counterclockwise.
10. Finish tightening the wheel bolts. Push
down on the wrench while at the end of
the
handle for increased leverage.
Tighten the wheel bolts in a star pattern
until each wheel bolt has been tightened
twice. The correct torque specification
for the wheel bolts is 89 Ft-Lbs
(120 Nm). If in doubt about the correct
tightness, have them checked with a
torque wrench by your authorized dealer
or at a service station.
11. Securely stow the jack, tools, chocks,
and flat tire.
WARNING!
A loose tire or jack thrown forward in a
collision or hard stop could endanger the
occupants of the vehicle. Always stow the
jack parts and the spare tire in the places
provided. Have the deflated (flat) tire re-
paired or replaced immediately.
Road Tire Installation
1. Mount the road tire on the axle.
2. Install the remaining wheel bolts with the
threaded end of the wheel bolt toward the
wheel. Lightly tighten the wheel bolts.
WARNING!
To avoid the risk of forcing the vehicle off
the jack, do not fully tighten the wheel
bolts until the vehicle has been lowered.
Failure to follow this warning may result in
serious injury.
3. Lower the vehicle to the ground by turning
the jack handle counterclockwise.
Mounting Spare Tire
181