11
Consumer Service: 1.800.453.7673
www.kolcraft.com/jeep
To insert batteries, use a phillips head screwdriver
to unfasten battery cover. Insert batteries as shown.
Requires 2 “AA” batteries (Not Included). Secure
battery cover.
Para insertar las pilas, use un destornillador con
punta de cruz para quitar la tapa del compartimiento
de pilas. Insertar las pilas como se ve en el dibujo.
Requiere 2 “AA” pilas (No Incluidas). Vuelva asegurar
la tapa.
3
As leg is lowered, push button into the top position.
Be sure all 4 buttons are in the same numbered
position.
Inserte las patas ensambladas en los agujeros para
montar la base, a través de las aberturas de las
ruedas, empujando el botón y presionando hacia abajo
sobre la bandeja.
NOTE: To maintain stopping performance, clean
friction strips regularly with damp cloth.
NOTA: Para mantener la función de parar, limpie las
tiras de fricción con regularidad con un trapo húmedo.
1
1
To Install Batteries in Electronic
Steering Wheel
Para instalar las pilas en los juguetes
electronicos
Continued on next page
Continuación en la página siguiente
To Adjust Walker Height
Para ajustar la altura de la andadera
To modify the walker height, only one level can be
adjusted at a time on each leg. To adjust walker
height up or down, push button in and raise or lower
leg. Before use, be sure all 4 legs have buttons in the
same position.
Cuando cambie la altura de la andadera, solo puede
modificar la altura de cada pata un nivel a la vez. Para
ajustar la altura de la andadera hacia arriba o abajo,
empuje el botón y suba o baje la pata. Antes de usarlo,
asegúrese de que los 4 botones están en la misma
posición.
B
1
1
Friction Strips
Tiras de Fricción
W19J-R3_W14J.qxd 8/24/2012 9:38 AM Page 11