Jeep 2004 Liberty Скачать руководство пользователя страница 53 | Manualshive

Страница: 53 / 374

Jeep 2004 Liberty Скачать руководство пользователя страница 53

For almost all sizes of properly seated adults, the passen-
ger frontal airbag will be enabled in the event of a
collision. For small teenagers and some small adults,
depending on size, the airbag may or may not be enabled
in the event of a collision. For small teenagers and some
small adults, depending on size, the airbag may or may
not be enabled in the event of a collision. Both drivers

and passengers should always use the PAD indicator
light as an indication if the front passenger is properly
positioned or not. If the PAD indicator light comes on
when an adult is in the passenger seat, have the passen-
ger re-position themselves in the seat until the light goes
out. Remember, if the PAD indicator light is illuminated
the passenger front airbag will not inflate. For properly
installed child restraint systems and children properly
seated on the front passenger seat, the airbag will be
disabled. If at all possible, place children 12 years and
younger in a back seat.

•

The Driver and Passenger Airbag/Inflator Units are
located in the center of the steering wheel and the right
side of the instrument panel. When the ORC detects a
collision requiring the airbags, it signals the inflator
units. A large quantity of nontoxic gas is generated to
inflate the front airbags. Different airbag inflation rates
may be possible based on collision severity and occu-
pant size. The steering wheel hub trim cover and the

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

53

2

«
...
51
52
53
54
55
...
»

Содержание 2004 Liberty























































































































































































































































































































































































Отзывы:

Нет отзывов