Jeep 2004 Liberty Скачать руководство пользователя страница 232 | Manualshive

Страница: 232 / 374

Jeep 2004 Liberty Скачать руководство пользователя страница 232

WARNING!

On vehicles equipped with a limited-slip differen-
tial, never run the engine with one rear wheel off the
ground. The vehicle may drive through the rear
wheel remaining on the ground and cause you to
lose control of your vehicle.

PARKING BRAKE

To set the parking brake, pull the lever up as firmly as
possible. When the parking brake is applied with the
ignition ON, the “Brake Warning Light” in the instru-
ment cluster will light.

NOTE:

The instrument cluster “Brake Warning Light”

indicates only that the parking brake is applied. You must
be sure the parking brake is fully applied before leaving
the vehicle.

To release the parking brake, pull up slightly, press the
center button, then lower the lever completely.

232

STARTING AND OPERATING

«
...
230
231
232
233
234
...
»

Содержание 2004 Liberty























































































































































































































































































































































































Отзывы:

Нет отзывов