Jeep 2004 Liberty Скачать руководство пользователя страница 109 | Manualshive

Страница: 109 / 374

Jeep 2004 Liberty Скачать руководство пользователя страница 109

To Set At A Desired Speed

When the vehicle has reached the desired speed, press
and release the SET button. Release the accelerator and
the vehicle will operate at the selected speed.

To Deactivate

A soft tap on the brake pedal, normal braking, or pressing
the CANCEL button will deactivate the Speed Control
without erasing the memory. Pressing the ON·OFF but-
ton or turning off the ignition erases the memory.

To Resume Speed

To resume a previously set speed, press and release the
RES·ACCEL button. Resume can be used at any speed
above 30 mph (50 km/h).

To Vary The Speed Setting

When the Speed Control is on and set, speed can be
increased by pressing and holding the RES·ACCEL but-
ton. When the button is released, a new set speed will be
established.

Tapping the RES·ACCEL button once will result in a 2
mph (3 km/h) speed increase. Each time the button is
tapped, speed increases, so tapping the button three
times will increase speed by 6 mph (9 km/h), etc.

To decrease speed while speed control is on and set, press
and hold the COAST button. Release the button when the
desired speed is reached, and the new speed will be set.

To Accelerate for Passing

Depress the accelerator as you would normally. When the
pedal is released, the vehicle will return to the set speed.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

109

3

«
...
107
108
109
110
111
...
»

Содержание 2004 Liberty























































































































































































































































































































































































Отзывы:

Нет отзывов