Jeep 2004 Liberty Скачать руководство пользователя страница 217 | Manualshive

Страница: 217 / 374

Jeep 2004 Liberty Скачать руководство пользователя страница 217

Gear Ranges

P (Park)
Supplements the parking brake by locking the transmis-
sion. The engine can be started in this range. Never use P
(Park) while the vehicle is in motion. Apply the parking
brake when leaving the vehicle in this range. Always
apply the parking brake first, and then place the selector
in P (Park) position.

WARNING!

Unintended movement of a vehicle could injure
those in and near the vehicle. As with all vehicles,
you should never exit a vehicle while the engine is
running. Before exiting a vehicle, you should always
shift the vehicle into P (Park), remove the key from
the ignition, and apply the parking brake. Once the
key is removed from the ignition, the transmission
shift lever is locked in the P (Park) position, securing
the vehicle against unwanted movement. Further-
more, you should never leave children unattended
inside a vehicle.

The following indicators should be used to ensure that
you have engaged the transmission shift lever into the P
(Park) position:

STARTING AND OPERATING

217

5

«
...
215
216
217
218
219
...
»

Содержание 2004 Liberty























































































































































































































































































































































































Отзывы:

Нет отзывов