Jeep 2004 Liberty Скачать руководство пользователя страница 119 | Manualshive

Страница: 119 / 374

Jeep 2004 Liberty Скачать руководство пользователя страница 119

NOTE:

The tire pressure sensors must be retrained after

rotating the tires or replacing one or more sensors. If a
wheel rotation is not followed by the retrain procedure,
the system will not properly inform you of the correct
vehicle location for a low or high pressure tire.

The following describes how to use this feature:

1. Locate the training magnet in the glove compartment
(shaped like a doughnut).

2. Press the MENU button until RETRAIN TIRE SEN-
SORS is displayed.

3. Press the STEP button to select YES to retrain TPM
sensor.

4. Press the MENU button to enter selection.

5. Display will read TRAIN LEFT FRONT TIRE.

NOTE:

There is a 60 second timer for training the first

tire and a 30 second timer between training the remain-
ing tires. If either of these timers expire, the EVIC will
abort the training procedure.

6. Starting at the left front tire, place the training magnet
over the valve stem until the horn chirps (This takes
approximately 5 seconds).

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

119

3

«
...
117
118
119
120
121
...
»

Содержание 2004 Liberty























































































































































































































































































































































































Отзывы:

Нет отзывов