manualshive.com logo in svg

Jeanneau SUN ODYSSEY 49 DS, Руководство пользователя, Страница: 59 / 126

Поделиться
Скачать
Jeanneau SUN ODYSSEY 49 DS Скачать руководство пользователя страница 59

55/122

WINCHES

Avoid rope jamming during winch handling. Do not leave loose ropes on the winches but fasten them 
on cleats.

Adjust the winches on receipt of your boat (rinse them regularly during the season). The winches should 
rotate freely, they need overhaul as soon as it slightly seizes.

MAINTENANCE

RECOMMENDATION

Carry out the complete maintenance of the winches regularly

(before and during the sailing season).

- Remove the drums and clean them.
- Lubricate the drums with a film of white grease or Teflon to reduce the friction and fight against 

corrosion (this type of grease is clean, non toxic and biodegradable).

WARNING

Refer to the manufacturer's instructions to remove the winches and put them back.

Improper refitting may result in accidents (e.g. kick of the crank handle).

5

RIGGING AND SAILS

Содержание SUN ODYSSEY 49 DS































































































































Отзывы:

Нет отзывов