Jeanneau SUN ODYSSEY 49 DS Скачать руководство пользователя страница 119 | Manualshive

Страница: 119 / 126

Jeanneau SUN ODYSSEY 49 DS Скачать руководство пользователя страница 119

115/122

HOISTING

- Install a fore rope, a rear rope and fenders.
- When craning, check that no device is crushed by the belts (sounder, speedometer, shaft, etc.).
- Mark the belt position with adhesive tape on the toe rail (most of the boats are already fitted with

these stickers). The belt position will be useful during the craning for a future launching.

- The crane hook will be fitted with a gantry or a spacer with two belts. The belts shall not be hooked

directly on the hook, since it would result in unusual compressive stresses on the hull.

- Hoist slowly. Control the movement of the boat with ropes.

AFTER LAUNCHING

- Check the sounder and speedometer fittings for tightness if need be.
- Open the valves and make sure that they are tight with the hull and relevant hose.
- Check the stuffing box for watertightness (Refer to chapter 9 "Stuffing box").
- Before starting the engine, refer to chapter 9 "Engine".

STEPPING THE MAST

Refer to chapter 5 "Rigging and Sails".

WARNING

Do not stay on board or under the boat during hoisting.

10

LAUNCHING

«
...
117
118
119
120
121
...
»

Содержание SUN ODYSSEY 49 DS































































































































Отзывы:

Нет отзывов