Jeanneau SUN ODYSSEY 49 DS Скачать руководство пользователя страница 123 | Manualshive

Страница: 123 / 126

Jeanneau SUN ODYSSEY 49 DS Скачать руководство пользователя страница 123

119/122

ENGINE

The engine winterization shall be carried out by a professional. Depending on the boat location, afloat
or ashore, winterization is different.

Here are a few major tasks to carry out:

Afloat

- Drain the cooling system and fill it with antifreeze.
- Shut off the battery switches, grease the terminals and check the battery voltage.
- Change the anode.
- Fill the fuel tanks to a maximum in order to avoid condensation.
- Please refe to the engine manual for anything relating to the engine.

Ashore

- Take the batteries ashore and keep them on maintenance charge.
- Drain all the cooling, exhaust, oil and fuel systems.
- Carry out the winterization operations specified by the manufacturer, keeping in mind that the

freeze hazard is more significant when the boat is ashore.

- Remove and lubricate the thru-hull fittings with valves of the cooling systems, leave them open

and check the hoses.

- Slacken the a.c. generator and pump belts.

11

WINTER STORAGE

«
...
121
122
123
124
125
...
»

Содержание SUN ODYSSEY 49 DS































































































































Отзывы:

Нет отзывов