manualshive.com logo in svg

Jeanneau SUN ODYSSEY 49 DS, Руководство пользователя, Страница: 101 / 126

Поделиться
Скачать
Jeanneau SUN ODYSSEY 49 DS Скачать руководство пользователя страница 101

97/122

230 V SYSTEM

(As far as possible) use electric appliances with double insulation or with three conductors (Neutral-Live 
wire-Ground).

Connect the metallic covers or boxes of the electric appliances that are installed to the protective 
conductor of the boat (green conductor with yellow stripes).

SHORE POWER

MAST HARNESS CONNECTION

Connect the mast harness after stepping the mast.

You have access to the harness at the level of the mast, between the deck and inner moulding.

ELECTRONICS

Wire runs are available to complete the boat equipment.

Do not install electronic instruments or repeaters less than 1,50 m away from the radio loudspeakers.

DANGER

Never let the end of the boat/shore supply cable hang in the water:

The result may be an electric field liable to hurt or kill the swimmers nearby.

RECOMMENDATION

In order to reduce the risks of electic shock and fire:

- Before you plug in or unplug  the boat/shore supply cable, switch off the shut off device 

connected to the shore supply.

- Plug in the boat/shore supply cable in the boat before you plug it into the shore supply socket.
- Unplug the boat/shore supply cable on shore first. Close the shore socket cover.
- Do not modify the connections of the boat/shore supply cable.

8

ELECTRIC SYSTEMS

Содержание SUN ODYSSEY 49 DS































































































































Отзывы:

Нет отзывов