JDW ZQ562, Инструкция по эксплуатации

Страница: 18 / 24

17
battery pack from the charger and allow time for the battery to
cool down before recharging.
c) The battery in your new tool is not charged when it leaves
the plant. Therefore it must be full charged before using the first
time.
d) Please charge the battery to reach full or no less than half
charge before storage. If the tool will not be used for long periods
of time, charge the battery every 3-6 months.
Charging Procedure
1. Connect the charger with the charger base firstly, and then
plug the charger into an appropriate outlet. The light (d) will be
green.
2. Slide the battery pack into the charger, the light (d) will
be off at once, at the same time the light (e) will turn to red to
indicate the charging process has started.
3. When charging is completed, the light (e) will be off at
once, and the light (d) will turn to green. The pack is now fully
charged, unplug the charger and remove the battery pack.
WARNING: When battery charge runs out alter continuous use
or exposure to direct sunlight or heat, allow time for the tool to
cool down before re-charging to achieve the full charge.
Charging Indicator
- Red On = Charging
- Green On = Fully Charged
8. To Remove or Install Battery Pack (See Fig. 20, 21)
Depress the battery release button (f) to release battery pack
from your trimmer. After recharging, insert the battery pack into
trimmer’s battery port. A simple push and slight pressure will be
sufficient until a click is heard.