JDW ZQ562, Инструкция по эксплуатации

Страница: 17 / 24

16
4. Adjusting The Height (See Fig. 9, 10)
Unscrew the Height Adjustment Locking knob (10) in the direction
indicated to unlock, turn it clockwise.
Adjust the length of the Aluminum tube to the most comfortable
length.
Tighten the Height Adjustment Locking knob (10) in the direction
indicated to lock, turn it counterclockwise.
5. Adjusting The Cutting Angle(See Fig.11, 12, 13, 14, 15 )
Press the cutter angle adjustment button (8) and rotate the
machine head to the most comfortable and balanced position.
Then release the cutter angle adjustment button (8).
Push the rotation locking button (9) downward and rotate the
shaft 180 degree clockwise.
6. Adjusting the plastic cutting blade (See Fig. 16, 17)
Rotate the plastic cutting blade(c) out from the cutting head for
using.
NOTE: Make sure that the sharp part of plastic cutting blade(c) is
always toward the safety guard when using.
WARNING! The charger and battery pack are specially designed
to work together so do not attempt to use any other devices.
Never insert or allow metallic objects into your charger or battery
pack connections because of an electrical failure and hazard will
occur.
7. Charging The Battery Pack (See Fig. 18, 19)
NOTE:
a) Do not use any charger other than that specifically
provided for use with the equipment.
b) If the battery pack is very hot you must remove your