Installation Procedures
In vehicle Setup (Direct Connect)
Tip!
The External
antenna port is
usually located
behind a rubber
stopper at the back
of your phone near
the antenna.
A.
Firstly install your antenna. (1)
B.
Route the cable to inside the vehicle and
connect to the booster (3) socket
marked “antenna”.
C.
Connect the signal lead (4) to the
booster (3) marked “signal adapter”.
D.
Connect the signal adapter (4) to the cell
phone adapter.
E.
Plug the power cable into the booster (3)
power input and the other end (5) into the cigarette socket of the vehicle. The
signal will take about 5-10 seconds to be amplified and will be increased
gradually.
Installation Procedures – Cont’
In vehicle Setup (Hands Free Kit)
A.
Firstly install your antenna and HFK.
B.
Route the cable to inside the vehicle and
connect to the booster (3) socket marked
“antenna”.
C.
Connect the HFK cable (1) to the booster
(3) marked signal adapter.
D.
Plug the power cable into the booster (3) power input and the other end (5)
into the cigarette socket of the vehicle.
E.
Turn on the switch. The signal will take about 5-10 seconds to be amplified
and will be increased gradually.
Installation Tip!
•
Magnetic mount antennas need to be placed on a metal surface at
least 5-8” sq. for the system to perform well.
•
You may use the 3ft signal lead supplied with your booster to mate
between the HFK and the booster.
5
