Installation Procedures – Cont’
Indoor Setup
1. Decide on a suitable place for installing
the booster. It is advisable to have as close
as possible to the mobile phone.
2. Connect the antenna (1) to the booster
(3) connector marked “antenna”. Locate
antenna at least 20cm from nearby persons.
3. Connect the signal lead (4) to the
booster (3) marked “signal adapter”. Connect the signal adapter (4) to the cell
phone adapter.
4. Connect the optional power transformer (2) then switch on.
5. The signal will take about 5-10 seconds to be amplified and will be increased
gradually.
Introduction
The JDTECK Signal Booster is ideal for use in motor vehicles, boats, home or
office use, where there may be a weak signal in the cellular network. This poor
reception may be the result of distance from the nearest cell tower or the
presence of obstructions between the cell tower the receiving device.
The Booster provides amplification of transmit and receive signals for improving
voice quality or data transfer range and access. Different models are available for
virtually any mobile network across the globe.
Features:
•
High power output for improved
performance.
•
Easy
D
o
I
t
Y
ourself Installation.
•
Compatible with most Hands Free
Kits.
•
Lightweight and Compact.
•
FCC Approved
•
1 Year Warranty
Troubleshooting!
If after turning on the booster and waiting 5-10 seconds, there is no signal
increase shown on the indicator, check the following:
1) The power LED on the booster is on.
2) All connectors are connected properly and secure.
3) Relocate the antenna.
•
Can improve reception of any device on the mobile network.
6
3
