JDS Uniphase PathTrak HCU200, Инструкция по установке и эксплуатации

Страница: 14 / 22

Section 2: HCU200 Unpacking and Setup
PathTrak™ HCU200 Install User’s Guide Rev. 000
7
17 There is no need to reboot the HCU200. Once you
press the "Enter" button at the end of each field, the
address is set and applied. When all the addresses
are set, verify network connectivity from the Path-
Trak server to the HCU200.
18 The PathTrak Server AND Client must be at least
version 2.6 to recognize the HCU200.
19 Proceed with adding the HCU200 to a PathTrak
Server per instructions documented in Chapter
Three of document 6510-00-0430.
Figure 12 HCU200 Rear Panel