JDS Uniphase PathTrak HCU200, Инструкция по установке и эксплуатации

Страница: 12 / 22

Section 2: HCU200 Unpacking and Setup
PathTrak™ HCU200 Install User’s Guide Rev. 000
5
Figure 8 Physical (MAC) address of the HCU200
Ethernet adapter
Figure 9 IP address of the PathTrak server that this
HCU200 is connected to (This will change/
update when the HCU200 is added to a
new server)
11 Using the keypad and display on front panel or
PathTrak Client software, IP address of HCU200 to
appropriate value. Setting the IP address informa-
tion on the HCU200 is a simple process done
completely from the front panel of the unit.
12 To set the IP address of the HCU200, use the up or
down arrow keys to scroll to the IP address field on
the LCD and press the "Enter" button. The hori-
zontal line that indicates that this is a field that may
be edited drops to the bottom of the first digit in the
IP address field becoming a cursor and indicating
that the HCU is now in "edit mode" (
Figure 10 ).
CAUTION
Before setting any IP address information in the HCU200,
please confirm with your network administrator that the IP
addresses you have are valid for your network configuration
and will not cause any conflicts on your local area network.