22
ORL-55
JDSU
4 B
ASIC
F
UNCTIONS
– or –
Select
DISABLE
to switch off Auto-
3. Press
[MENU ENTER]
to confirm the setting.
If Auto
mode is activated and a laser source
supporting Auto-
is connected
Auto-
will be
displayed in the bottom center display pane.
Display in Auto-
mode
When
Auto-
mode is activated and different
wavelengths are detected, the power levels measured at
these wavelengths are displayed simultaneously.
Fig. 7
Display in
Auto
-
mode showing the detected wave-
lengths and their power levels.
Setting the display contrast
1. Select
Edit Contrast
in the CONFIGURATION
menu.
The CONTRAST menu opens:
2. Press
[
]
to increase/decrease the contrast.
3. Press
[MENU ENTER]
to store the value and exit from
the menu.
Setting factory default values
1. Select
Set
Factory default
in the CONFIGURATION
menu.
