JDS Uniphase ORL-55 Series Скачать руководство пользователя страница 19

Страница: 19 / 83

JDSU

ORL-55

3 G

ETTING

TARTED

Operation from USB interface power

Although the USB interface is primarily intended for
remote control, it can also be used to power the ORL-55.

To power the ORL-55 via the USB interface:



Just connect a standard USB cable to any USB socket
of a PC or USB hub.

Notes:

• The device can be operated manually even if it is

powered via the USB interface.

• It is not possible to charge the batteries via the USB

interface.

• The device is powered by the SNT-121A AC Adapter/

Charger Unit, if the SNT-121A AC Adapter/Charger
Unit and the USB interface are connected.

Connecting optical cables

Mounting test adapters

JDSU provides a number of test adapters for connecting
the ORL-55 to the interface to be tested (connector or
bare fiber).

You can connect all standard optical connector types to
the instrument using these adapters. The test adapters
are suitable for connectors with planar (PC) and angled
end surfaces (APC).

Contact your local JDSU Sales Company for available
adapter types.

To mount the JAE test adapter:

1. Open the head cover and remove the protecting cap

(if still mounted).

2. Place the test adapter vertically on the optical

connector with the locking lever open.

3. Close the locking lever when the test adapter is firmly

seated. You will hear the locking mechanism lock.

Содержание ORL-55 Series




















































































Результаты поиска

Содержание ORL-55 Series

Отзывы:

Бренды по названию

Популярные бренды

JDS Uniphase ORL-55 Series, Руководство по эксплуатации

Результаты поиска

Содержание ORL-55 Series

Отзывы:

Бренды по названию

Популярные бренды