manualshive.com logo in svg

JDS Uniphase ORL-55 Series, Руководство по эксплуатации

Поделиться
Скачать
JDS Uniphase ORL-55 Series Скачать руководство пользователя страница 2

Please direct all enquiries to your local 
JDSU sales company. 
The addresses can be found at:

http://www.jdsu.com

The description of additional features of the 
device can be found at:

http://www.jdsu.com

Copyrights

This product or parts of this product are based on the Rec-
ommendations and/or Standards issued by the Standard-
ization Sector of the International Telecommunications 
Union - ITU-T and/or the European Telecommunications 
Standards Institute - ETSI. These Recommendations and 
Standards are copyright to these organizations. ITU-T Rec-
ommendations or ETSI Standards may not be copied and/
or made available to third parties in whole or in part without 
the written agreement of ITU-T 
and/or ETSI.

© Copyright 2011 JDSU. All rights reserverd.
JDSU and JDSU logo are trademarks of JDS Uniphase 
Corporation.

All other trademarks and registered trademarks are the 
properties of their respective owners.

JDSU Deutschland GmbH
Mühleweg 5, 72800 Eningen u. A.

Note:

 Changes may be made to specifications, 

descriptions and delivery information.

Printed in Germany

Order no.: BN 2287/98.01
Version: 2011.03
Previous version: 2007.10

Содержание ORL-55 Series




















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды