![background image](http://html2.mh-extra.com/html/jcm/gen2u/gen2u_training-overwiev_3555072015.webp)
© 2017 JCM American Corporation
1 5
August, 2017
7. Click on
Full Upgrade
.
If the
Upgrading Boot/BSP-Alert!
a
) is displayed, then an
Upgrade Key must be inserted into the 4-pin Connector adjacent to the GEN2U
Printer’s USB Upload Port (Figure 13
c
).
8. Remove the Rubber Plug from the 4-pin Connector (Figure 13
b
).
9. Insert the Upgrade Key into the GEN2U Printer’s 4-pin Connector (Figure 13
c
).
10.Click the
Yes
screen button (Figure 13
d
) to continue.
11.When the Printer status indicates
***Printer Successfully Updated.***
a
), the Firmware Update is complete.
a
c
d
b
Figure 13
Insert Upgrade Key/Upgrading Boot/BSP Alert! Message
a
Figure 14
JCM DFU Downloader Firmware Update Complete