JCM GEN2U, Обзор тренировки

Страница: 10 / 20

Part No. 960-000192R_Rev. A © 2017 JCM American Corporation
1 0
GEN2U™ Printer JCM® Training Overview August, 2017
JCM PRINTER BASIC DRIVER
The JCM Printer Basic Driver is used to test and troubleshoot the GEN2U
Printer. To test the GEN2U Printer, proceed as follows:
1. Remove power from the GEN2U Printer Unit.
2. Connect the GEN2U Printer to a PC using the Evaluation Harness DB-9
Connector.
3. Reapply power to the GEN2U Printer Unit.
4. From the PC Desktop, double-click on the
JCM Printer Basic Driver icon.
5. Click to select the Communication
Protocol
- either
RS-232
or
Netplex
Communications (Figure 9 a ).
6. Click to select the COM Port Number where the GEN2U Printer is connected
(Figure 9 b ).
The
JCM Printer Basic Driver
User Interface is displayed (refer to Figure 10 on
page 11).
NOTE: Printers with USB Firmware will always have RS-232 Communications active.
a
b
Figure 9 JCM Printer Basic Driver UI (Opening Screen)