P/N 960-000173R_Rev. A {EDP #229278}
© 2013, JAPAN CASH MACHINE CO., LTD.
3 2
Series Banknote Acceptor (EBA-40) Integration Guide
OFF
Green
(3)
Number Of
Characters is less
or more than its
Settings
The number of Barcode Coupon’s characters does not match its settings.
[Solution] Check that a proper Barcode Coupon is used, and the Ticket is not
damaged or exhibiting unfit conditions (as shown on page 4 ). Check that the
following part is properly assembled and/or Harness connected. Clean or adjust
the following Sensor.
[Relative Parts] Barcode Sensor.
If the error is not resolved, change the above related part or parts.
OFF
Green
(4)
Start Bit Detection
Error
A start bit of a Barcode Coupon cannot be detected.
[Solution] Check that a proper Barcode Coupon is used, and the Ticket is not
damaged or exhibiting unfit conditions (as shown on page 4 ). Check that the
following part is properly assembled and/or Harness connected. Clean or adjust
the following Sensor.
[Relative Parts] Barcode Sensor.
If the error is not resolved, change the above related part or parts.
OFF
Green
(5)
Stop Bit Detection
Error
A stop bit of a Barcode Coupon cannot be detected.
[Solution] Check that a proper Barcode Coupon is used, and the Ticket is not
damaged or exhibiting unfit conditions (as shown on page 4 ). Check that the
following part is properly assembled and/or Harness connected. Clean or adjust
the following Sensor.
[Relative Parts] Barcode Sensor.
If the error is not resolved, change the above related part or parts.
OFF
Green
(6)
Barcode Coupon
Type Error
A Barcode Coupon Type does not match its settings.
[Solution] Check that a proper Barcode Coupon is used, and the Ticket is not
damaged or exhibiting unfit conditions (as shown on page 4 ).
OFF
Green
(7)
Magnification
Abnormal
When adjusting Barcode Coupon data, Sensors detected an abnormal Barcode
Coupon magnification condition.
[Solution] Check that a proper Barcode Coupon is used, and the Ticket is not
damaged or exhibiting unfit conditions (as shown on page 4 ). Check that the
following part is properly assembled and/or Harness connected. Clean or adjust
the following Sensor.
[Relative Parts] Barcode Sensor.
If the error is not resolved, change the above related part or parts.
OFF
Green
(8)
Doubled Insertion
Error
Multiple accumulated Barcode Coupons were inserted simultaneously.
[Solution] Check that multiple Barcode Coupons are not piled before inserting it.
OFF
Green
(9)
Reserved
Contact your local JCM Representative if this error occurs.
OFF
Green
(10)
Reserved
Contact your local JCM Representative if this error occurs.
OFF
Green
(11)
Upside-Down
Insertion
A Barcode Coupon is inserted upside-down.
[Solution] Insert a Barcode Coupon in the proper direction.
OFF
Green
(12)
Reserved
Contact your local JCM Representative if this error occurs.
OFF
Green
(13)
Barcode Coupon
Length Abnormal
The Barcode Sensor calculated a Banknote length longer or shorter than the
specified value.
[Solution] Check that a proper Barcode Coupon is used, and the Ticket is not
damaged or exhibiting unfit conditions (as shown on page 4 ).Check that the
following part is properly assembled and/or Harness connected. Clean or adjust
the following Sensor.
[Relative Parts] Barcode Sensor.
If the error is not resolved, change the above related part or parts.
OFF
Green
(14)
Abnormal Barcode
Coupon
A Barcode Coupon inhibited by the Settings is inserted.
[Solution] Check that a proper Barcode Coupon is used, and the Ticket is not
damaged or exhibiting unfit conditions (as shown on page 4 ). Check that the
following part is properly assembled and/or Harness connected. Clean or adjust
the following Sensor.
[Relative Parts] Barcode Sensor.
If the error is not resolved, change the above related part or parts.
Table 25
LED Flash Reject Error Codes For Barcode Coupons (Continued)
LED
State
LED
Sequence
Error
Causes and Solutions
