JCM EBA-40, Руководство по интеграции

Страница: 38 / 46

P/N 960-000173R_Rev. A {EDP #229278} © 2013, JAPAN CASH MACHINE CO., LTD.
3 0
EBA
®
Series Banknote Acceptor (EBA-40) Integration Guide
LED F
LASH
R
EJECT
C
ODE
C
ONDITIONS
; B
ANKNOTES
Table 24 lists the various LED Flash Reject Code causes & solutions for Banknotes.
Red
(11)
OFF Reserved
Contact your local JCM Representative if this error occurs.
Red
(12)
OFF Fraud Detection
Sensors detect Banknotes occurring with abnormal timing.
[Solution] Check that the following parts are properly assembled and/or Harness
connected. Clean or adjust the following parts and Sensors.
[Relative Parts] Entrance Sensor, Centering Timing Sensor, Validation Sensor, PB
Entrance Sensor, PB Exit Sensor, Exit Sensor, Feed Motor and Feed Motor
Encoder.
If the error is not resolved, change the above related part or parts.
Red
(13)
OFF
Centering
Mechanism
Abnormal
The Centering Guide has not moved.
[Solution] Check that the following parts are properly assembled and/or Harness
connected. Clean or adjust the following parts and Sensors.
[Relative Parts] Centering Guide, Centering Motor, Centering Guide Home Sensor.
If the error is not resolved, change the above related part or parts.
Red
(14)
OFF Box Key Unlocked
The Box Key has been unlocked,
[Solution] Lock the Box Key,
Check that the following part is properly assembled and/or Harness connected.
Clean the following Sensor.
[Relative Parts] Box Key Sensor.
If the error is not resolved, change the above related part or parts.
Red
(15)
OFF Stacker Removal
The Stacker has been removed from the EBA Unit.
[Solution] Check that the following part is properly assembled and/or Harness
connected. Clean or adjust the following part.
[Relative Parts] Stacker.
If the error is not resolved, change the above related part or parts.
Table 24 LED Flash Reject Codes For Banknotes
LED Color
State
LED
Sequence
Error Causes and Solutions
OFF
Green
(1)
Skewed Insertion
Error
The Banknote has been inserted in an incorrect/crooked direction.
[Solution] Insert a Banknote in the proper direction.
If the error is not resolved, insert a different Banknote.
OFF
Green
(2)
Abnormal Magnetic
Detection
The Magnetic Sensor detected an abnormal Banknote Type.
[Solution] Check the Banknote’s condition. Refer to “Banknote Fitness
Requirements” on page 4 for the required Banknote conditions.
[Relative Parts] Magnetic Sensor.
If the error is not resolved, change the above related part or parts.
OFF
Green
(3)
Remaining
Banknotes
Returned
While Initializing, a Banknote remaining in the EBA Unit’s Validation path has been
returned.
OFF
Green
(4)
Magnification
Abnormal
When adjusting Banknote data, Sensors detected an abnormal Banknote
magnification condition.
[Solution] Check that the Banknote is not damaged nor exhibiting unfit conditions.
Refer to “Banknote Fitness Requirements” on page 4 for unacceptable Banknote
types.
[Relative Parts] Validation Sensor.
If the error is not resolved, change the above related part or parts.
OFF
Green
(5)
Banknote
Transportation
Abnormal
Sensors detected Banknotes remain in the validation path, or none existed during
an abnormal timing interval.
[Solution] Check that the following parts are properly assembled and/or Harness
connected. Clean or adjust the following parts and Sensors.
[Relative Parts] Entrance Sensor, Centering Guide Sensor, Validation Sensor, PB
Entrance Sensor, PB Exit Sensor, Exit Sensor.
If the error is not resolved, change the above related part or parts.
OFF
Green
(6)
Denomination
Error
The Validation Sensor detected an abnormal Banknote Type.
[Solution] Check that the Banknote is not damaged nor exhibiting unfit conditions.
Refer to “Banknote Fitness Requirements” on page 4 for unacceptable Banknote
types.
[Relative Parts] Validation Sensor.
If the error is not resolved, change the above related part or parts.
Table 23 LED Flash Error Codes (Continued)
LED
Sequence
LED Color
State
Error Causes and Solutions