JCM DBV Series Скачать руководство пользователя страница 24

Страница: 24 / 24

Part No. 960-000187R_Rev. A

November, 2016

JCM® Training Overview

DBV-500 Banknote Validator

925 Pilot Road, Las Vegas, Nevada 89119

Office & Technical Support: (800) 683-7248 (option 1 after hours), FAX: (702) 651-0214

E-mail: [email protected]

www.jcmglobal.com

JCM is a registered trademark of JCM American Corporation. All other product names

mentioned herein may be registered trademarks or trademarks of their respective companies.
Furthermore,

™

and

are not always mentioned in each case throughout this publication.

"JCM American Corporation has been accredited as an Authorized Provider by the

International Association for Continuing Education and Training (IACET)”

DBV-500 PARTS LIST

Table 11

DBV-500 Parts List

EDP No.

JAC No.

Description

Use JAC #

→

501-100218R UAC Module

G00286

←

Use EDP # Universal Power Supply for UAC

Use JAC #

→

400-000158R DBV-500 UAC Harness

Use JAC #

→

302-100007RA Power Cord, 2-prong USA

Use JAC #

→

302-000001R USB Male-A to Mini-B Cable

236939

←

Use EDP # Calibration Reference Paper (KS-091)

NOTE: Product EDP Numbers that begin with “G” designate products developed by
JCM-E Germany.

Содержание DBV Series

























Результаты поиска

Содержание DBV Series

Отзывы:

JCM DBV Series, Руководство пользователя, Страница: 24 / 24

Результаты поиска

Содержание DBV Series

Отзывы: