jcb MS-254SB, Инструкции и руководство пользователя

Страница: 24 / 32

24
JCB-MS-254SB
Instruction & User Manual
Sawdust bag (Fig. 1)
The saw is equipped with a sawdust bag (17)
for sawdust and chips.
Squeeze together the metal ring on the dust
bag and attach it to the outlet opening in the
motor area.
The sawdust bag (17) can be emptied by
means of a zipper at the bottom.
Changing the saw blade (Fig. 14/15/16/17)
Remove the power plug!
Important.
Wear safety gloves when changing the
saw blade. Risk of injury!
•
Swing up the machine head (4).
•
Undo the screw on the guide bar (37),
so that it can move freely and be pivoted
downwards.
•
Press the release button (3). Swing up the
saw blade guard (5) to the point where the
recess in the saw blade guard (5) is above
the flange bolt (29).
•
Press the saw shaft lock (31) with one hand.
With the other hand insert the allen key (d)
in the flange bolt (29).
•
Hold the Allen key (d) and slowly close the
saw blade guard until it touches the Allen
key.
•
Firmly press the saw shaft lock (31) and
slowly rotate the flange bolt (29) in
clockwise direction. The saw shaft lock (31)
engages after no more than one rotation.
•
Now, using a little more force, slacken the
flange bolt (29) in the clockwise direction.
•
Turn the out flang (30) right out and
remove the external flange (32).
•
Take the blade (6) off the inner flange (32)
and pull out downwards.
•
Carefully clean the out flange (30), outer
flange (30) and inner flange (32).
d
31
Fig.14
Fig.15
Fig.16
Fig.17
31 6
29
5
30
All manuals and user guides at all-guides.com