jcb MS-254SB, Инструкции и руководство пользователя

Страница: 26 / 32

26
JCB-MS-254SB
Instruction & User Manual
Damaged electrical connection cable
The insulation on electrical connection cables is
often damaged.
This may have the following causes:
•
Passage points, where connection cables are
passed through windows or doors.
•
Kinks where the connection cable has been
improperly fastened or routed.
•
Places where the connection cables have
been cut due to being driven over.
•
Insulation damage due to being ripped out
of the wall outlet.
•
Cracks due to the insulation ageing.
Such damaged electrical connection cables
must not be used and are life-threatening due
to the insulation damage.
Check the electrical connection cables
for damage regularly. Make sure that the
connection cable does not hang on the power
network during the inspection.
Electrical connection cables must comply with
the applicable VDE and DIN provisions. Only use
connection cables with the marking „H 07 RN“.
The printing of the type designation on the
connection cable is mandatory.
AC motor
•
The mains voltage must be 220-240 V~
•
Extension cables up to 25 m long must have
a cross-section of 1.5 mm
2
.
Connections and repairs of electrical
equipmentm may only be carried out by an
electrician.
Please provide the following information in the
event of any enquiries:
•
Type of current for the motor
•
Machine data - type plate
•
Machine data - type plate
Transport
•
Tighten the set screw (26) in order to lock
the turn table (14)
•
Activate the release lever (3), press the
machine head (4) downwards and secure
with the fasten bolt (23). The saw is now
locked in its bottom position.
•
Fix the saw’s drag function with the locking
screw for drag guide (20) in rear position.
•
Carry the equipment by the fixed saw table
(15).
•
When reassembling the equipment proceed
as described under “Before starting the
equipment”
Storage
Store the machine and its accessories in a
dark, dry and frost-free place, inaccessible to
children. The ideal storage temperature is
between 5 and 30˚C.
Store the power tool in its original packaging.
Cover the power tool to protect it from dust
and humidity.
Keep the operating manual with the power
tool.
All manuals and user guides at all-guides.com
all-guides.com