jcb MS-254SB, Инструкции и руководство пользователя

Страница: 16 / 32

16
JCB-MS-254SB
Instruction & User Manual
OPERATING INSTRUCTIONS
Intended Use
The drag, crosscut and mitre saw is designed
to crosscut wood and plastic respective of the
machine’s size. The saw is not designed for
cutting firewood.
Not use the saw to cut materials other than
those specified described in manual.
WARNING!
The supplied saw blade is only intended for
the sawing of wood! Do not use this blade
for the sawing of plastic!
WARNING!
The equipment is to be used only for its
prescribed purpose. Any other use is deemed
to be a case of misuse. The user / operator
and not the manufacturer will be liable for any
damage or injuries of any kind caused as a
result of this.
The equipment is to be operated only with
suitable saw blades. It is prohibited to use any
type of cutting-off wheel.
To use the equipment properly you must also
observe the safety information, the assembly
instructions and the operating instructions to be
found in this manual.
All persons who use and service the equipment
have to be acquainted with this manual and
must be informed about the equipment’s
potential hazards. It is also imperative to
observe the accident prevention regulations in
force in your area. The same applies for the
general rules of health and safety at work.
The manufacturer will not be liable for any
changes made to the equipment nor for any
damage resulting from such changes. Even
when the equipment is used as prescribed it
is still impossible to eliminate certain residual
risk factors. The following hazards may arise
in connection with the machine’s construction
and
design:
•
Contact with the saw blade in the
uncovered saw zone.
•
Reaching into the running saw blade (cut
injuries).
•
Kick-back of workpieces and parts of
workpieces.
•
Saw blade fracturing.
•
Catapulting of faulty carbide tips from the
saw blade.
•
Damage to hearing if ear-muffs are not used
as necessary.
•
Harmful emissions of wood dust when used
in closed rooms.
Please observe that our equipment was
not designed with the intention of use for
commercial or industrial purposes. We assume
no guarantee if the equipment is used in
commercial or industrial applications, or for
equivalent work.
All manuals and user guides at all-guides.com
all-guides.com