jcb CT160, Руководство оператора, Страница: 95 / 166

Maintenance
Maintenance Schedules
85 9831/7750-1 85
Component Task 10 50 500 1,000 2,000
Drum bearing (3)
Lubricate
Drum Distance Spacers / Buffer (1)
Check/ Change(if necessary)
Articulation Joint Check
Steering Cylinder Bolts Check
Hydraulics
Hydraulic System Check (Leaks)
Oil Check (Level)
Oil Replace
Oil Reservoir Clean
Oil Filter (2)
Replace
Hoses - Damage or Leaks Check
Steering Rams - External Leaks Check
Rams - Chrome Condition Check
Electrics
Battery charge indicator Check
Wiring for Chafing/Routing Check (Condition)
Battery Mounting Check (Condition)
Battery Terminals for Condition and
Tightness
Check (Condition)
Bodywork and Cab
Safety Decals/Notes Check
Cab Isolation Mounts Check
ROPS (Roll-Over Protective Struc-
ture)
Check (Condition)
Condition of Paintwork Check
Seat Belt Condition and Security (If
fitted)
Check
Machine Generally Check for Damage and Clean
(1) Check the tightness of the bolts/screws every day for the first week (when machine is new), then thereafter
every 500 h.
(2) Change at recommended interval - or when the warning light is on.
(3) Drum bearing must be lubricated after 4,000 h of operation.
Functional Tests and Final Inspection
Start the engine to do these maintenance tasks. Engine can be started, if the drive lever is in park brake position.
It is not mandatory to occupy the operator seat before starting the engine.
Table 13.
Item Operation 10 h 50 h
100 h (1)
500 h 1,000 h 2,000 h
Engine
Idle Speed Check and Adjust
Maximum No load con-
dition.
Check
Exhaust smoke. Check