jcb CT160 Скачать руководство пользователя страница 11

Страница: 11 / 166

Introduction

About this Manual

9831/7750-1

Introduction

About this Manual

Model and Serial Number

This manual provides information for the following model(s) in the JCB machine range:

Model

From:

To:

CT160

2556201

CT260

2556350

Using the Manual

This operator's manual is arranged to give you a good understanding of the machine and its safe operation.

It also contains maintenance and technical data.

Read this manual from the front to the back before you use the machine for the first time, even if you have used

machines of a similar/same type before as the technical specification, systems and controls of the machine

may have changed. Particular attention must be given to all the safety aspects of operating and maintaining

the machine.

If there is anything you are not sure about, ask your JCB dealer or employer. Do not guess, you or others could

be killed or seriously injured.

The general and specific warnings in this section are repeated throughout the manual. Read all the safety

statements regularly, so you do not forget them. Remember that the best operators are the safest operators.

The illustrations in this manual are for guidance only. Where the machines are different, the text and or the

illustration will specify.

The manufacturer's policy is one of continuous improvement. The right to change the specification of the

machine without notice is reserved. No responsibility will be accepted for discrepancies which may occur

between specifications of the machine and the descriptions contained in this manual.

All of the optional equipment included in this manual may not be available in all territories

Left-Hand Side, Right-Hand Side

In this manual, 'left' and 'right' mean your left and right when you are seated correctly in the machine.

Figure 1.

Right

Left

Cab/Canopy

This manual frequently makes references to the cab. For example, 'do not operate the machine without an

operator's manual in the cab'. These statements also apply to canopy build machines.

Содержание CT160







































































































































































Результаты поиска

Содержание CT160

Отзывы:

jcb CT160, Руководство оператора, Страница: 11 / 166

Результаты поиска

Содержание CT160

Отзывы: