jcb CT160 Скачать руководство пользователя страница 89

Страница: 89 / 166

Maintenance

Maintenance Safety

9831/7750-1

Fuel

Fuel is flammable, keep naked flames away from the fuel system. Stop the engine immediately if a fuel leak is

suspected. Do not smoke while refuelling or working on the fuel system. Do not refuel with the engine running.

Completely wipe off any spilt fuel which could cause a fire. There could be a fire and injury if you do not follow

these precautions.

Antifreeze

Never perform checks or maintenance on the cooling system when it is hot. Never remove radiator cap when

engine is hot - severe risk of scalding. Never remove radiator cap when the engine is running. Antifreeze is

toxic. If accidentally swallowed, medical advice must be sought Immediately. Antifreeze is corrosive to the skin.

If accidentally spilled on to skin, it must be washed off immediately. Protective clothing and eye protection must

be worn when handling antifreeze.

Hygiene

JCB lubricants are not a health risk when used correctly for their intended purposes.

However, excessive or prolonged skin contact can remove the natural fats from your skin, causing dryness

and irritation.

Low viscosity oils are more likely to do this, so take special care when handling used oils, which might be

diluted with fuel contamination.

Whenever you are handling oil products you must maintain good standards of care and personal and plant

hygiene. For details of these precautions we advise you to read the relevant publications issued by your local

health authority, plus the following.

Storage

Always keep lubricants out of the reach of children.

Never store lubricants in open or unlabelled containers.

Waste Disposal

CAUTION

It is illegal to pollute drains, sewers or the ground. Clean up all spilt fluids and/or lubricants.

Used fluids and/or lubricants, filters and contaminated materials must be disposed of in accordance with

local regulations. Use authorised waste disposal sites.

CAUTION

Damaged or spent batteries and any residue from fires or spillage must be put in a suitable

closed receptacle and must be disposed of in accordance with local environmental waste regulations.

All waste products must be disposed of in accordance with all the relevant regulations.

The collection and disposal of used oil must be in accordance with any local regulations. Never pour used

engine oil into sewers, drains or on the ground.

Handling

CAUTION

The temperature of the hydraulic oil will be high soon after stopping the machine. Wait until it

cools before beginning maintenance.

New Oil

There are no special precautions needed for the handling or use of new oil, beside the normal care and hygiene

practices.

Used Oil

Used engine crankcase lubricants contain harmful contaminants.

Содержание CT160







































































































































































Результаты поиска

Содержание CT160

Отзывы:

jcb CT160, Руководство оператора, Страница: 89 / 166

Результаты поиска

Содержание CT160

Отзывы: