JBT Fresh'n Squeeze 2nd Generation Multi-Fruit..., Руководство оператора

Страница: 9 / 40

9
FNS-0012-060-EN June 2019 Rev A
Operating Instructions
Equipment Check
Before plugging the Multi-Fruit Juicer into an electrical outlet, the following steps
must be performed:
1. Locate the Multi-Fruit Juicer on a level surface.
This will prevent fruit feed problems.
CAUTION : WHEN MOVING JUICER, ALWAYS TRANSPORT ON LEVEL SURFACE.
USE RAMPS IF NECESSARY. AVOID LEDGES, IRREGULAR FLOORS
OR DRAIN INDENTIONS.
2. Lock casters.
To lock, push down on caster with foot. To unlock, push again with foot.
3. Check waste container.
Open cart door to verify that waste container is in place.
4. Check juicing components.
Remove reservoir, juice nozzle and splash shield, then check juicing components.
5. Make sure juice nozzle is firmly seated. If not present, wet o-ring before installing.
6. Make sure juice reservoir is firmly in place.
7. Close and turn latch to secure door.
8. Make sure juice reservoir valve is in closed position.
9. Check the hopper for foreign objects.
Remove any foreign objects found in the hopper.
10. Make sure floor area around Juicer is clean and free of obstructions and water.
Wear appropriate non-slip footwear when water is necessary.