JBT Fresh'n Squeeze 2nd Generation Multi-Fruit..., Руководство оператора

Страница: 33 / 40

33
FNS-0012-060-EN June 2019 Rev A
Operator Maintenance (continued)
2. Check orifice tube for damage.
Refer to Figure 9.
Replace tube when:
a. Chunks are missing from top end.
b. Score marks 1/32" or deeper appear along the length of the tube.
Figure 9. Severely Damaged Orifice Tube
3. Check for loose or missing nuts and bolts.
a. Tighten or replace nuts and bolts as necessary.
b.
DO NOT
exceed torque ranges specified.
c. ALWAYS use JBT Corporation recommended spare parts.
Periodic Inspection
Perform the following steps every week.
1. Test all access cover interlock switches.
Juicer should stop automatically when any access cover is opened. Individually open and
close the front door and hopper access door.
If juicer continues to run when front door or hopper access is opened, the interlock switch is
defective. Stop the juicer and call service provider immediately.
See Troubleshooting Section.
2. Inspect casters for damage or wear.
Caster must roll freely and front and rear brakes must lock.