JBM 53137, Инструкция по эксплуатации

Страница: 5 / 24

· 5 ·
REF. 53137
end of the tool. Protective goggles and earmu-
ffs must be worn, together with protective gloves
where possible. A mask may also be required for
certain work.
Ensure that you stand in a stable, firm position.
Pneumatic tools generate high sound levels and
may also generate vibrations depending on the
type of work. They must not be used continuously.
Maintenance:
At the start of every day and before stopping use
for a long period introduce a few drops of special
oil directly into the inlet port. Do not use flammable
liquids such as petrol or diesel fuel.
Regularly check the condition of the regulator filter
and the oil level in the air supply lubrication unit.
Check that the supply couplings, piping and acces-
sories are in perfect condition. Regularly purge pi-
pes and the compressor tank. Do not overlook the
compressor’s pressure test expiry date.
Only use manufacturer’s original parts for maintai-
ning tools.
JBM Campllong S.L. shall not be held responsible
for any modifications made to the tools nor for any
failure to observe general safety rules relating to
the use of compressed air.
Warranty:
Any warranty is expressly waved in cases of dama-
ges arising out of regular wear, overload, handling
or use not suitable for the tool. To be applicable,
the tool must be returned. It covers replaced parts
and labour for a period of 12 months from the date
of purchase.
Any defect may be removed by replacing the tool or
repairing it, as the case may be.