7
Varyscan
®
4 1200 HMI
channel 2
y-axis
channel 3
gobo
channel 4
colour
channel 5
shutter/dimmer
channel 6
iris
channel 7
rotating gobos; positioning and rotation
channel 8
effect wheel
DIP-switch position: DIP-switch No.2 switch 2 and 3
off
2. 6 channel drive mode (Clay Paky - Goldenscan 3 compatible)
channel 1
iris and gobo rotation
channel 2
colour
channel 3
gobo and effect wheel
channel 4
dimmer/shutter
channel 5
x-axis
channel 6
y-axis
DIP-switch position: DIP-switch No.2 switch 2
off
, switch 3
on
3. JB-lighting 6 channel drive mode
channel 1
x-motor
channel 2
y-motor
channel 3
gobo
channel 4
colour
channel 5
dimmer/shutter
channel 6
iris/gobo rotation
DIP-switch position: DIP-switch No.2 switch 2 and 3
on
Reset on DMX:
DIP-switch No.2 switch 4
If you would like to reset your Varyscan
®
from your DMX-desk, turn switch 4
on
at DIP-switch No.2. Now you have
the possibility to reset your Varyscan
®
, if you transmit DMX-factor 255 via gobo channel.
If switch 4 at DIP-switch No.2 is turned
off,
reset on DMX is not possible.
