3
Features
Gripper Actuator
Fluid
Air
Applicable tubing
Ø 4mm
Operating pressure
1,5 to 7 bar
Tube connection to fix Cartridge.
Tube connection to release Cartridge.
CSR is designed to be used in automatic soldering
processes. Two pairs of grippers can be used to
hold the cartridges while they are not in use.
It can work in combination with JBC Automatic
Soldering Irons (
TRA
) and the new cartridges for
automation (
R245
and
R470
ranges).
Assembly
CSR needs to be fixed to the robot work place area. Use a
DIN912 M6
screw and the mounting hole
as shown bellow.
The gripper actuators must be connected to an air-circuit by using the tube connections
A
and
B
.
A
B
A
B
Mounting holes
A
B
40 mm
50 mm
60 mm
80 mm
100 mm
130 mm
130 mm
para manuales - color gris
200 mm
300 mm