Model 101-2018
ADDITIONAL TOOLS REQUIRED
Under-Desk and Wall Mount for CPU / Computer Case
www.humancentric.com/patents
PARTS INCLUDED
© 2017 HumanCentric Ventures LLC
www.humancentric.com
Phillips Head Screwdriver
Flat Head Screwdriver
Adjustable Wrench
Note:
Not all parts will be used in the installation. Multiple configuration options are provided to fit different
TVs, and different parts are used for different configurations.
A Computer Case Holder
COMPATIBILITY INFORMATION
Weight capacity:
10kg (22lbs)
Maximum Dimensions:
Width: 3.5” to 8” (88mm to 203mm)
Height 12” to 21” (300mm to 533mm)
Power drill with ¼” (wood stud) or ⅛” (concrete wall or block) drill bit
Level
Marking Pencil
For wall mounting :
F Washers (4)
G Allen Wrench
E Felt pads (12)
D Plastic wall anchors (4)
B st4.8 (#10) x 16mm Self-Tapping Screw (4)
C st4.8 (#10) x 38mm Self-Tapping Screw (4)
Read the entire instruction manual, including the warnings at the end of the manual, before you start installation and assembly.
If you have any questions regarding any of the instructions or warnings, please contact the HumanCentric support team for
assistance at [email protected]
CAUTION
Use with products heavier than the maximum weights indicated may result in damage to the mounted devices or
personal injury.
IMPORTANT
Ensure that you have received all parts according to the parts list prior to installation. If any parts are missing or
damaged, please contact the HumanCentric support team for replacements at [email protected]
1
