ENGLISH
USER MANUAL
JB Systems
®
12/13
Accu Color
156-205
Dimmer 3
206-255
Dimmer 4 (slow)
4 channel DMX-Mode: all pixels working together in RGB + MASTER DIM/SOUND/STROBE
Channel:
Value:
Function:
Remarks
1
000-255
Red (0-100%)
2
000-255
Green (0-100%)
3
000-255
Blue (0-100%)
4
000-190
Master dimmer
000=0% ~ 190=100% (full open)
191-200
Sound control (7 colors)
Audio sensitivity: 191=low ~
200=high
201-247
Strobe
Increasing speed: 201=slow ~
247=fast
248-255
Master dimmer @ 100%
Master dimmer is full open
MAINTENANCE
•
Switch off the unit and unplug the mains cable.
During inspection the following points should be checked:
•
When an optical lens is visibly damaged due to
cracks or deep scratches, it must be replaced.
•
The
mains
cables
must
be
in
impeccable
condition
and
should
be
replaced
immediately
when
even
a
small problem is detected.
•
In order to protect the
device from overheat the cooling fans (if any)
and
ventilation openings should
be
cleaned monthly.
•
BATTERY
maintenance:
We
strongly
advice
to
follow
the
maintenance
requirements
imposed
by
the
battery reseller. On top of that you should at least every 6 months:
•
Do a visual check of the battery: cleanness, terminal damage, any damage of the housing, …
•
Check the if the poles of the battery are still well tightened to the wires.
•
…
Attention:
We strongly recommend internal cleaning to be carried out by qualified personnel!
RECYCLING
OF
USED
BATTERIES:
used
Li-Ion
batteries
should
be
considered
and
handled
as
dangerous
waste.
Each
country
has
its
own
regulations
for
the
recycling
of
used
rechargeable
batteries: check the local regulations in your country or ask your battery vendor for more information
on recycling of
the used rechargeable batteries!
SPECIFICATIONS
This unit is radio-interference suppressed. This product meets the requirements of the current European and
national guidelines. Conformity has been established and the relevant statements and documents have
been
deposited by the manufacturer.
This device
was
designed to produce decorative effect lighting and is used in light show systems.
Mains Input:
100-240V,
50/60HZ
Power consumption:
60
Watt
ProCon
input/output daisy chaining:
16A max.
(be aware for current peeks at start up!)
Rechargeable battery:
11,1Vdc / 15600 mAh (lithium)
Sound Control:
Internal microphone
DMX connections:
XLR 3pin
LEDs:
6
LEDs
5IN1
10W
Beam angle:
22°
Size:
167 x 138 x 185mm
Weight:
3.7
kg