![background image](http://html1.mh-extra.com/html/jb-systems/accu-color/accu-color_operation-manuals_3508643012.webp)
ENGLISH
USER MANUAL
JB Systems
®
10/13
Accu Color
OPERATING INSTRUCTIONS
A. Standalone 1unit:
•
Select one of the automatic modes or select a fixed color
•
Select the static or sound control mode
•
Refer to chapter [HOW TO SETUP] to learn how to make the previous settings.
B. Two or more units in master/slave setup:
•
Connect 2 to maximum 16 units together. Refer to the chapter “electrical installation” to learn how to
do this.
•
Set the slave mode for each projector: the first one must be set on in DMX mode or in a show mode
(for example : [
FAdE]
)
•
Connect all units to the mains. The units will start working automatically and show the internal chase
programs.
Remark: You can connect a JBS LEDCON-02 Mk2 remote controller to the master unit if you want to
have more control over the master/slave operation.All projectors must be in LEDc mode!
C. Connect an optional JBS LEDCON-02 Mk2 controller for more control:
The JBS LEDCON-02 Mk2 controller can only be used in standalone or master/slave mode. Connect the
controller to the DMX-input of the first unit (master). Make sure that the Accu Color projectors are all set
to
channel mode [LEDc]. Now you can control all the connected units in 4 or 8channel mode. Refer to
the user manual of the JBS LEDCON-02 Mk2 controller for more information.
D. Controlled by IR remote-controller:
Switch on the projector (17). Push button [ON] on the IR remote controller.
[Jr00] will appear on the display. You are now ready to use the IR remote
controller.
When you turn the projector off with the IR remote controller, [Jr0F] will be
shown on the display.
Before you can start using the projector with another controller you have to
push one of the buttons under the display ([MENU]-[
▲]-[▼]-[ENTER]). The
projector will now be disconnected from the IR remote controller.
You can also use the IR remote controller with several projectors in Master-
slave mode. Select the desired color, fade on the Master. The slaves will follow
the instructions from the Master projector.
E. Controlled by universal DMX-controller:
•
Connect all units together. Refer to the chapter “Electrical installation for two or more units in DMX-
mode” to learn how to do this (don’t forget to address all units properly!)
•
Turn on the DMX controller.
Since each unit has its own DMX-address, you can control them individually. Remember that each unit
uses 4 to 10 DMX-channels as shown in the DMX charts below:
DMX CHARTS
Mode 4CH:
DMX
Channel
DMX-value
function
remarks
1
000-255
Color mixing 0% - 100%
2
000-255
White color dimmer
WHITE
3
000-255
Amber color dimmer
AMBER
4
000-255
Master Dimmer 0% - 100%
MASTER DIMMER