JB-lighting Lichtanlagen GmbH Sallersteigweg 15 D-89134 Blaustein phone: +49 7304 9617-0
www.jb-lighting.de
- 33 -
7 Edit cues
Each feature of a cue can be edited without the necessity of rewriting the whole cue. Basically these steps
have to be done to edit the cue:
To enter edit menu press edit key of the combi section
Recall cue by pressing the cue key
The diagram of the store matrix will show whether features have
been stored or not.
Features have been stored
No features have been stored
The features name, fade time, trigpoint and release link can be directly accessed by means of softkeys and
encoder wheels. Changes of the parameters mentioned will be stored simply by pressing the edit key again.
à
See chapter 6.2.1 to 6.2.6
DMX values of the parameters such as pan movement, tilt movement, colours and gobos can be accessed
after pressing the softkey MODIFY and one of the feature selection keys.
After changing dmx-values press store key of combi section to store new data.
7.1 Editing the name
Press edit key of combi section.
Recall cue by pressing cue key.
Press softkey until function NAME is displayed in an inverted way.
To clear square press arrow key no. 7
Enter new name by means of keys of cue, chases and sequence block.
Store new name either by pressing softkey again or by leaving menu. (Press edit key)
