Jayco JAY SPORT 2018, Руководство пользователя

Страница: 66 / 145

Section 4: Vehicle Operation
58
Step 4 -
Bottom of the
door is in the channel, and
the door frame is against
the aluminum pieces on
each side of the doorway.
Clips turn to hold the door
in place. It helps to have
a second person outside to
help guide the door into
the channel so it is square in the frame.
Step 5 -
The top of the door goes under the
bracket that held the screen door to the ceiling.
Secure the top of the door with the two dead
bolts that slide over the aluminum plate.
Step 6 -
On the outside of the door; secure the
Velcro of the tent to the Velcro on the door. Make
sure the tent portion does
NOT
overlap the hinges or
the gap in the door frame. This can damage the door
when opened. The latch side of the door should be
done in a similar manner. Do
NOT
overlap the tent
beyond the doorframe edge.
Step 7 -
Door installation is now complete.
The door shades are built into the door.
Press the gray tabs (arrows) at the top to
slide the upper shade down. Press the gray
tabs at the door latch and raise the bottom
shade up.
Table of Contents Maintenance Record