Jayco JAY SPORT 2018, Руководство пользователя

Страница: 63 / 145

Section 4: Vehicle Operation
55
Repeat the process on the rear bed using the shorter braces.
Make sure the bed is fully extended.
Step 6 -
If your model is equipped with a slideout, make
sure the seal on the interior makes contact with the
bracket on the slideout (arrow). The slideout should
already be pulled out in order to slide the beds out
(see
Step 4
).
Step 7 -
Locate the bed bow braces under the front
and rear bed mats. These braces have a large
loop at one end and a small claw clamp on the
straight end.
Step 8 -
Attach the “claw” (A) to
the curved bed bow that is laying
on the front bed. It will clamp
to the bed bow between the two
screws. Push the curved window
bow up into position at the
window end of the bed. Repeat
for rear bed.
Step 9
- Install the bed bow brace loop end (with the
silver buttons) in the bracket on the ceiling. Repeat this
for the other bed.
Your model may be equipped with a table next to the bed ends when in the
stowed or stored position. Remove the table prior to installing the bed brace.
Do not step on, or put your weight on the table while it is in the stowed
position. Doing so may result in damage to the table and/or personal injury.

Table of Contents Maintenance Record