Jayco Designer 27 RKS, Руководство пользователя

Страница: 34 / 115

23
SLIDEOUT ROOM OPTION
The slideout room is designed for additional floor space and comfort. Mechanical
components are gear driven and produced by Power Gear Company. Read ALL instructions
in the next four pages before operation to become familiar with the system.
CAUTION: Do not place excessive weight in the slideout room.
Components
This slideout system has numerous major components and are as follows:
• One inner rail drive assembly to support room weight.
• A 12-volt DC motor and drive shaft that will operate the room using energy from an on-
board recreation vehicle battery.
• A specially designed auto reset fuse has a load sensing capability that stops the motor
when the room reaches its fully extended or retracted position.
• A manual override system that allows you to move the room in or out in the event of
a power loss.
WARNING:
• Ensure that the travel trailer is level before operating the slideout room.
• Ensure there are no people or obstructions blocking the path of the room when it
is moving.
• Keep away from the slide rails when the room is in motion.
• The gear assembly may pinch or catch on loose clothing causing personal injury.
• Always install travel bars for storage and transportation. (Eagle and Qwest models
only.)
• Ensure the slideout is in the closed position prior to hooking the unit to the tow
vehicle.
Failure to follow these instructions
could result in serious injury or death.
Operations (Manual Slideout – Resort Travel Trailers)
EXTENDING ROOM
1. The travel trailer must be level and the stabilizer jacks in the down position.
CAUTION: Additional support jacks are not needed under the slideout. Damage
can occur to your slideout room from improper use of support jacks.
Fig. 3-5
2. For Eagle and Qwest models, remove “travel bars” (Fig. 3-5) from behind the
top facia board located above slideout room.
3. Unlock slideout locking mechanism.