Jayco Designer 27 RKS, Руководство пользователя

Страница: 103 / 115

91
MAINTENANCE CHECKLIST
Prior to First Trip
q
Check LP gas lines for leaks.
q
Test carbon monoxide detector (Generator/Generator Prep option only.)
q
Test LP gas detector.
q
Sanitize fresh water system.
q
Tighten wheel nuts to specified torque values.
q
Open all windows and the door and start the furnace. Leave the windows and
door open and the furnace on until all fumes fully dissipate.
First Ten Miles
q
Tighten wheel nuts to specified torque values.
First Twenty-Five Miles
q
Tighten wheel nuts to specified torque values.
First Fifty Miles
q
Tighten wheel nuts to specified torque values.
First Two-Hundred Miles
q
Tighten wheel nuts to specified torque values.
q
Have brakes adjusted by a qualified service technician.
Each Trip
q
Test LP gas detector.
q
Check battery water level. (If equipped with battery.)
q
Check brake fluid level in master cylinder reservoir. Keep filled to within ½”
from top of reservoir.
q
Check master cylinder cap for tightness.
q
Check tire pressure and wear.
q
Check running lights.
q
Inspect safety chains for signs of wear.
q
Test brakes.
After Every Tire Change
q
Tighten wheel nuts to specified torque values at ten miles, twenty-five miles
and fifty miles.
Daily
q
Recharge battery after each use.
q
Ensure LP gas detector operation light is green in color.
Weekly
q
Test LP gas detector.
q
Check tire pressure and wear.