Jay-Lor A100 Скачать руководство пользователя страница 41 | Manualshive

Страница: 41 / 72

background image

AAA-055-00138

Rev. 1/14/15

Jaylor Owner Manual

- 40 -

Mini Mixer Models

16.3 Transporting the A50 Skid Steer Model

The A50 skid steer model

is designed to be easily and conveniently moved from one location to

another using a skid steer loader. The following outlines the procedure for securing and
transporting this model.

Think SAFETY! Work SAFELY!

1. Be sure all bystanders are clear of the machine and that there are no riders on the machine.

2. Be sure that the skid steer loader is rated to lift the mixer at full load. Remember, a loaded

mixer (machine and payload) may weigh as much as 2,500 lbs. (1134 kg).

3. Be sure that the control pendant, cable and hydraulic hoses (from mixer) are secured away

from the quick attach mounting plate to avoid pinching or damage.

4. Position the skid steer loader facing the quick attach mounting plate. Using the quick attach

adaptor/latch, connect the skid steer loader to the quick attach mounting plate on the A50
skid steer. Once the latches have fully engaged drop the latch pins through the lower holes
on the quick attach mounting plate

(refer to your

skid steer loader’s

operating/maintenance manual for more manufacturer-specific instructions)

.

5. For safety, do not go under the mixer or skid steer loader lift arms or reach through the lift

arms when they are raised. Only go under a raised mixer if properly supported using a lift or
safety stands.

6. Once in motion, it is not recommended that the machine be transported faster than 15 km/hr.

(10 mph). Never transport faster than the road or terrain conditions will allow you to do
safely. If upgrades are included (stand and wheels) ensure excessive force from the skid
steer loader is not exerted onto the wheel casters as this could result in damage to A50 skid
steer components.

Figure 33 - A50 Skid Steer Model Transportation

1. A50 skid steer mixer
2. Quick Attach Mounting Plate

– Ensure connection between skid steer loader and

mounting plate is fully engaged.

3. Spring Foot

– During operation the spring foot should be in the retracted position between

the frame rails (only on upgraded models).

4. Wheel Casters

– Ensure the wheels maintain contact with the ground during operation

(only on upgraded models).

«
...
39
40
41
42
43
...
»

Содержание A100









































































Отзывы:

Нет отзывов

Похожие инструкции для A100

Бренд: JB Systems Страницы: 12

Бренд: A.MENARINI Страницы: 2

Бренд: CAMPAGNOLA Страницы: 4

Бренд: Bartscher Страницы: 28

Бренд: Bartscher Страницы: 13

Бренд: IBEX Страницы: 10

Бренд: M-system Страницы: 12

Бренд: Rainbow Страницы: 18

Бренд: Farmet Страницы: 102

Бренд: Launch Страницы: 3

Бренд: Launch Страницы: 43

Бренд: Launch Страницы: 8

Бренд: Launch Страницы: 67

Бренд: Launch Страницы: 55

Бренд: LAUNCH TECH Страницы: 14

X-431 PROS V4.0

Бренд: Launch Страницы: 80

Бренд: Parker Страницы: 64

Бренд: Parker Страницы: 40

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды