Jay electronique ISIS Series, Инструкция по установке и эксплуатации для пользователя

Страница: 65 / 156

- 65 -
ISIS
- 331260D
revision02
DE FR EN
The
ISE
transmitter can operate with two different radio
transmission modes :
Intermittent transmission
or
Continuous transmission
(selected by cursor No. 6 of transmitter «CONFIG» DIP switch).
The transmitter module of
IST
transceiver works only on
«
continuous transmission
» mode.
Important:
a transmitter
con fi gured with «
intermittent transmission
» mode will not work.
The choice of transmission mode will depend on the application in
which the
ISIS
product is used.
Intermittent radio transmission :
(cursor No. 6 set to OFF)
The transmitter
ISE
only transmits provided at least one of
its inputs is active.
This mode is recommended for applications where several
transmitters are associated to a single receiver. In this case,
you must ensure that the
ISIS
transmitters do not transmit
simultaneously.
Reminder:
a transmitter module
IST
con fi gured with
«intermittent transmission» mode will not work.
Continuous radio transmission :
(cursor No. 6 set to ON)
The transmitter
ISE
or transceiver
IST
transmits whatever
the state of its inputs.
This mode is recommended for applications where it is
necessary to monitor the availability of the radio link. This
control can be ensured by monitoring the output of the “Radio
quality” RM relay (see description on following pages).
4.3- Transmitter radio transmission modes
1 2
ON
3 4 5 6 7 8
CONFIG
"0"
"1"
= cursor position
1 2
ON
3 4 5 6 7 8
CONFIG
"0"
"1"
= cursor position