Jaton PowerPro VX, Руководство пользователя

Страница: 46 / 73

Appendix A
A-2
Pin number Name or significance of signal
1 +5VDC [ for power LED]
2 No connection[ no wire]
3 Ground[ for power LED]
4 Keyboard inhibit Signal
5 Ground
PN1 - There is a specific orientation for
this connector. Connect the two-thread
IDE LED connector to the pin 7 and 8. If
the HDD LED does not light up while the IDE drive is being accessed, you may reverse
the connector and try again.
Pin number Name of the signal or signification
7 HDD LED signal LED Anode
8 HDD LED signal LED Cathode
PN1 - Connect the four-threads speaker cable
to the PN1 pin 9 to pin 12.
Pin number Description Pin number Description
9 +5VDC 11 Ground
10 Ground 12 Sound Signal
J1 -
This connector is for AT
power supply connector. Unplug
the power core to power supply
before you connect the power supply to the main board.
Pin number Description Pin number Description
1 Power Good Signal 7 Ground
2 +5V 8 Ground
3 +12V 9 -5V
4 -12V 10 +5V
5 Ground 11 +5V
6 Ground 12 +5V
Keyboard - There is an orientation pin. Match the connector
for keyboard to connector on the main board.
Mouse :
There is a PS/2 mouse mini din connector
with 5-thread connector for the main board PS/2
mouse port. There is an orientation pin on the Mini
Din connector. Match the PS/2 Mouse connector to the Mini Din connector connected
with main board.
Some jumpers are reserved for diagnostic functions
and they must be set in normal position.
Adjust them according to the following recommendations. Make sure the JP3 (Clear
CMOS) jumper is on pin 1 and pin 2 for normal operation.
Installing HDD LED connector:
Installing speaker connector:
Installing AT Power input connector:
Installing Keyboard
Installing PS2 Mouse:
Adjusting Other Jumpers: