Jaton PowerPro VX, Руководство пользователя

Страница: 13 / 73

Main
Board
Installation
9
Pin number on board Name of the signal or signification
1 Mouse data
2 No connection
3 Ground
4 +5VDC
5 Mouse clock
The
“
PS/2 Mouse Port
”
is different from COM1 or COM2 serial port to which
you can also connect a Mouse. If you do not have a PS/2 Mouse, you can use a serial
mouse and connect it to COM1 or COM2 port.
Keyboard - Keyboard Connector
This connector has an orientation pin. Match and plug your keyboard connector to the
connector on the main board.
Pin number Name of the signal or signification
1 Keyboard data
2 No connection
3 Ground
4 +5VDC
5 Ground
6 Keyboard clock
LPT- Parallel port connector
There is a 26-pin connector on board to connect a 25-pin D-shaped female connector
for connecting an External Parallel device to your computer. You may want to change
your parallel port setting in BIOS setup to tune up the performance. Refer to Chapter 3
for details.
CN3 and CN4 - Serial Port Connectors
There are two 10-pin connectors on board to connect two 9-pin D-shaped (DB-9)
male connectors for connecting External Serial Devices to your computer. You may
need to change the Port settings in BIOS Setup if you have a Non-Plug and Play device
installed on the main board, such as a internal Non-PnP modem. The CN3 is set to serial
port 1 or COM 1 with I/O address 3F8h and the CN4 is set to serial port 2 or COM 2
address 2F8h. Pleas refer to Chapter 3 for details.
J4, J5 USB Universal Serial Bus connectors
There are two 4-pin headers on board to connect two standard USB device